J.P. MORASSE inc.

Survey and geodesic markers, signage plaque,

design and manufacturing

1-800-463-6866

bandeau-morasse-categorie-geodesie-

Geodesy products

When you need an absolute precision in X,Y and Z we suggest this frost resistant geodesic monument.  The center portion will be anchored at 2,35m below the surface where the frost won't go. The protective shell, totally independant from the center section will be the…

Additional Info

  • Product code TT2235

Image Gallery

For those area where a longer pipe can be easily installed. It shows the same characteristics than the TT2235  model with optional one meter extension.

Additional Info

  • Product code TR2235/RAL100

Image Gallery

25mm diameter galvanized steel pipe.  This 1,65m long marker is equiped with a twisted point to ease the driving in soil.  A zinc cap with a magnet will ease the location on the field.  Engraving with custom printing is available.

Additional Info

  • Product code T02165

Image Gallery

These markers are made from a 25mm round iron bar with a threaded section.  The brass or zinc caps are also threaded to fit the particular regulation of municipal and provincial governments of Ontario.  Our engraving department will customized all your caps.

Additional Info

  • Product code Z02150CUI

Image Gallery

Our protective covers will protect and ease the access to your geodesic T02165 monument.  Available for use in regular soil and also for asphalt.  When using with TT2235 and TR2235 you must add a 95mm lift. (HAUSSE4)

Additional Info

  • Product code REGALUS/REGALUR
Our high density polyethylene protective covers will protect and ease the access to your geodesic monument.  Always with an aluminium lid for regular soil installation.  Two sizes are available: 20cm height (REGMIX1) to be used with the T02165 also the 31,5cm height (REGMIX2) for use…

Additional Info

  • Product code REGMIX1/REGMIX2
Made from first quality brass-copper alloy, these markers come with a magnet attached to ease the location on the field.  Our engraving department will let you have a personalized marker at low cost.  Available with flat or domed top.   For some specific purpose you…

Additional Info

  • Product code G70CUI
Made from first quality zinc alloy, these markers come with a magnet attached to ease the location on the field.  Our engraving department will let you have a personalized marker at low cost.  Some informations can be stamped on the field. Available with flat or…

Additional Info

  • Product code G70ZIN

Image Gallery

To mark additionnal data field on your markers.  Letters and Numbers stamp set.

Additional Info

  • Product code POICHI/POILET
Our geodesic monument driver will help protect the head of your marker while providing a larger striking surface for driving your marker.  Available to fit common gaz powered hammer and conventional hammer.  Can fit: T02165, TT2235, TR2235.

Additional Info

  • Product code BUTENF/BUTENF-1/BUTENF-2/BUTENF-2M
The stainless steel ties from Panduit are the best to attach your witness plaque when nails aren't an option.  Available in one size: 33" (838mm) by 0.31" (7.9mm)

Additional Info

  • Product code Coupan
When a natural support is not available you can attach your plaques to this 1,80m galvanized "U" shaped beam.  Pre drilled holes to match most witness plaques.  Also available:  bolts and screws.

Additional Info

  • Product code POTBAL
StartPrev12NextEnd
Page 1 of 2